|LC_INPUT_VOLTAGE :||220V~240V / 50HZ (UK plug)|
Input Voltage: 220V~240V / 50HZ (UK plug)
Output Voltage Max: 17V
Power Max :10W
Machine cable : 1.5 Meters
Rotation up to 14,000 RPM
Forward and Reverse Operation switch
Light-weight design hand piece for precise operation
1. Emery tool: professionally shapes nails and makes the edge smooth .
2. Buffing tool: polishes nails to a healthy shine, push back cuticles and stimulate the growth of nails .
3. Shaping tool: flatten and smooth extra thick nails and rough surface .
4. Fine shaping tool: carves into corners and spots which are hard to reach .
5. Cuticle pusher: remove dead skin, keeps cuticles neat and cleans under nail .
HOW TO USE :
1. This tool is design for carver, engrave, rout, grind, sharpen, sand, polish,drill and more .
2. Unplug the tool form electrical outlet before loading a bit .
3. Press shaft lock button. Use the collect wrench to loosen the collect nut. Inset the bit (not included), and tighten the collet securely. But avoid excess tightening of the collect nut and never use a damaged bit.
4.There is an ON/OFF switch. When the switch is on,the tool runs at 20,000 RPM. There is a switch indicator with an orange line on it. Slide the switch to find the speed needed from 18,000-20,000 RPM.Slide the switch to the black dot for complete stop .
5. When finished, turn off the tool and unplug it.
1 x Electric Nail Drill Main control
1 x Handpiece
1 x Handpiece Stand
1 x 6 type basic bits set
1 x User manual (in English)
Your review is submitted successfully! We will process your review. Acceptable reviews will be posted within 1-5 business days.